There’s a reason why this type of manual switch continues to be the switch of choice for networking professionals everywhere: This tried-and-true optical switch performs as promised year after year.
The Ultra Secure Singlemode A/B Switches are reliable because it uses a micro-mirror instead of electronics to route data signals from one fibre optic port to the next. And unlike conventional electronic switches, there are no complex and vulnerable electronic circuits to monitor and protect from intrusion, component failure, or interference.
Latching Technology
The latching Fibre Optic Switches are a full-duplex, optical switch. The A/B switch for example can be used to connect one workstation to two different networks (one at a time) or to other remote devices. A front panel rotary style knob allows the user to select which of two ports (A or B) is connected to the COMMON © port on the switch. The switch operates using a unique all-optical micro-mirror movement. When you turn the rotary knob on the front of the switch to select a network, the internal micro-mirror movement redirects the optical beam from one network port to another network port by rotating a miniature mirror. This technique eliminates the need to convert optical signals to electronic signals to for switching and it is therefore transparent to data rates and protocols.
Applications
These switches are perfectly suited for applications where a selected connection must be maintained in the event of a power failure. You should use a non-latching fibre optic switch like Model #SW1000A for applications requiring a switch that falls back to pre-determined connection during the loss of AC power. These switches use power only for switching the selected connection. No power is required to pass data through the switches.
Compatibility — 9-/125-micron single-mode fibre
Crosstalk — -45 dB (typical) per FOTP-42
MTBF — 100,000 hours or 1,000,000 cycles
Optical Loss — 0.5 dB (typical) at 1300 nm per FOTP-34 method B
Sensitivity — 750 to 1440 nanometers
Switching Speed — Typical: 5 msec;
Maximum: 10 msec
Connectors — SW1033, SW1035: (3) pairs of ST®; SW1036: (3) pairs of SC
Power: (1) 3.5-mm input
Power — Input: 100–240 VAC, 50–60 Hz, autosensing;
Output: 5 VDC
Sign in
Contact Us
